your personal cnc Designer

3D Print

I recently purchased a Xiaomi Mijia Digital Thermometer / Hygrometer. It's a great little device. The only drawback so far is that there is no stand included. It only comes with a magnetic plate for wall mounting. Therefore I designed my own. It doesn't need any fancy magnets or stuff - its just gravity doing it's thing.

Xiaomi Mijia Thermometer / Hygrometer stand
I like to keep my car clean, and I've found the best spot for me to put a stray wrapper or empty can or cup while I'm piloting the scow is in a bag behind the passenger's seat. I used to have a reuseable bag in my VW Beetle that I'd throw stuff in, but to empty it, you'd have to take the seat cushion up and off... which in a Beetle means sliding the seat all the way back, then tipping it all the way forward... with a full bag of trash. These hooks snap onto the 17mm diameter uprights of my seat cushion in my Ford and drape over the back of the seat to hold a standard plastic bag, or a small reuseable. It's not the most amazing aesthetic solution ever, but it does keep it classy in my ride. Instructions This is palleted for an Up! Mini... just orient the little 2mm spacer norker down towards the build platform and hit 'place'. Derafting is not difficult. Just hook over the cushion upright and give it a little tug and it should snap on. It's sized for 17mm, so anything smaller should work OK. If you're fussy you could scale it to fit, since none of the other features are critical. These parts didn't need to be mirror image; they both could have been the same part... but it looks nicer this way.

Car Seatback Trash Bag Hooks
ve seen similar designs on other masks to make them more comfortable I've only tried this for one night, and at this point and it made a huge difference !. Just make sure you clamp it on the free end of the strap so it can move and not dig into your head. Enjoy :). Update, I found the old design a little l

ResMed FX mask hose clamp
I created a new and improved version of this turntable. The new version uses an Arduino Uno, stepper motor, 1602 LCD screen and a 9g servo motor. The turntable is now able to automatically take photos 360 degrees around which can be turned into a 3D-model using photogrammetry software. You can check it out here

Fully 3D-printable turntable
Black Rose

Black Rose
Update 18th of January 2016 As a thanks for the massive amount of downloads and feedback, here are updated versions for both sizes and a completely new version (also for both sizes). The files named "H6" are updated from the old version, they have a slightly thicker frame to prevent breaking when the charger is inserted. Some sanding/filing is still required unless you want to scale it up to 101-103%. Hard to say exactly how much, as all printers are slightly different. This version needs support, and maybe a raft (I use rafts). The files named "T1" are completely new. Even smaller than the previous version and needs no support. The cable exits on a slightly higher angle, so it might interfere with some bands, let me know if that is the case and I'll see what I can do. The higher angle makes it so that its flat on your nightstand even without the weight of the watch, or something tacking it down to the surface. My custom 24mm nylon-strap which is rather stiff works fine with this, but any feedback is appreciated. The only finish-work I did was to remove the raft. The 38mm-versions are not tested (as I don't have one), so if they're wrong please let me know as soon as possible. Hope you like it! :) My prints were done at 0,2mm layer height, 3 shells, 8% infill, with raft, support on "H6", none on "T1". Inspired by the "Nightstand-mode" in watchOS 2, here's a couple of horizontal nightstand-charging-stands... I use some blue-tack on the underside to prevent it from sliding around when I try to shut the alarm up in the morning. Enjoy. :) Instructions Rotate 90 degrees so that the base is flat on the buildplate. 200 micron, 2-3 shells,. Maybe a raft. Support only needed on "H6".

Tiny Apple Watch Nightstand... Stands... *NEW*
Use glue or 2 cm wide double-sided tape to stick this cable holder to a wall. It features two 10 mm, two 7.5 mm and three 5 mm slots for cables.

Cable Holder / Rack
Stand for holding a phone about 72mm wide (the phone in the picture is a Moto X4*. The stand has two positions depending on which side is placed down. The clip stays attached to the phone so it should work better on uneven surfaces (sofa, rock, bed, etc).

Clip Phone Stand
● I am afraid this is the best moon you've ever seen in Thingiverse. The hole ratio is almost 1:1 in anywhere. It is quite different from other models! You could simply modify into a moon style lamp or something else! Hope everyone would like it! ● You can have my blender file in the download page. Remember to apply the modifier which I leave to you for customized parameters. For more details please see instructions. :D Special thanks "Weichi Design Studio" in Taiwan for helping me bring the model to the real world. You can refer the link for details. Weichi Design Studio威祈產品設計室-台南3D模型制作 http://ppt.cc/LXm3T

The moon

This is my view of a simple lamp that also adds a bit of color to everyday life. It basically has 2 pieces, a top and a fin that needs to be printed 16 times. From the lamp_top file you can observe that this has small slots for the blades to fit in snuggly. I recommend using 1 or 2 shells and a maximum of 0.2 mm resolution. The infill here was 10 or 15% I don't remember. Total print time : about 11 hours.

Minimal lamp
upgrade design no raft no support 30~50% infill 0.2~0.3 layer thickness 1.2 mm shell top/bottom 1.2 nozzle 4.0 mm

(nuts bowl)
Napkin holder with tree of life motif. If you like my free designs check out my: premium designs: https://www.cgtrader.com/protonik shapeways shop: https://www.shapeways.com/shops/binfinite If you you want commercial license for my designs or custom made 3d model or have any questions just message me: sebastian.wac@gmail.com

Tree of life napkin holder
Without supports

Mercedes Keychain
Simple but effective cable spool. STL is high res, so you can scale it up to whatever size you want. Low res files are also available if the high res files are to big for you. Instructions Print with Low profile, no support. Print the two parts and snap them together.

Cable Spool
The bottle opener can help people with arthritis or limited finger dexterity open standard water bottle caps (⌀ 30mm or 1.18”). It provides a large gripping surface and clamps onto the caps with a small squeeze, allowing users to remove or screw on water bottle caps.

Bottle Opener
Wall Mounted Flat Bit Holder. Holding the most common drill bits from 1.5mm to 13mm with 3.2mm and 4.8mm extras. Also a few spare holes for doubles or other bits.

Flatbit Holder
This is a small machine mice that I made to use in my workshop. Its only light duty, mainly so I can hold work whilst I drill it, and possible glue parts together. Print Settings Printer: Mini Kossel Rafts: No Supports: No Resolution: 0.2 Infill: 10% on main body, 20% on handle Post-Printing Assembly You will need a short length of 8mm studding. Glue a nut into the machine vice body. Run the legth of studding through the (now captive) nut and add another nut at the end - dont forget to put the plate on before the next step!. You need to make the nut not turn, so either glue it to the end, or "distress" the thread so that it binds when you try to remove it. I used a couple of small wood screws to hold the plate which also traps the end nut. I managed to get the handle to be an interference fit on the rod, but you may need to use a bit of glue to help.

Small Drill Press vice
A screwdriver support designed for Facom's Torx screwdrivers from 20 to 5. Use 3xM4 screws to suport it to the wall/ Pegboard. Recommended settings: Layer height: 0.2mm Speed: <60mm/s Material: PLA Suports: Not necessary Buildplate size: at least 200x200 or it won't fit The example shown was printed on the helloBEEprusa from BeeVeryCreative.

Screwdriver wall/pegboard mount - Torx Facom
Are you tired of bad traction when rolling your office chair through mud and down hill in rocky terrain? Does your chair scratch the floor and make noice when making a pit stop? Not anymore with these awesome rubber tires that gives you control turning tight corners, gives you traction on wet tarmac, boosts your old office chair with nice wheel sides and extends life for your floor. Print it today Printed with Ninja Semi Flex 40 mm/s 240 C

Office Chair Rubber Tires
A coaster set themed off of StarWars including a caddy. You can download and use them all as a set as I designed or pick more of your favorite design. I may add other designs if there is a demand. I have not printed these yet, in slicing everything looked ok except some of the detail on the Millennium Falcon coaster might be too small, but as I cannot yet print I can't say for sure.

StarWars Coaster Set
Simplistic sunglasses and glasses rack - nice companion to a car key rack. 21.5cm wide to fit a MakerBot Replicator 1 print bed in width. Has holes that will fit most counter-sunk screw heads for a cleaner look. No support needed for printing.

Sunglasses Holder Rack
Low profile filament spool holder, for when you want your filament sitting next to your printer, and don't take up a lot of space.

Filament Spool Holder - Bearings and custom width
I added some files for Fusion 360 along with a couple of other formats in the event that someone needs to make a change to this file. I ran into a situation where my cap would not fit onto the water bottles at work. They were too small and way too tight. I don't know if this because the water bottles are ever so slightly different in size or if the filament I used had different properties and allowed more shrinkage that the last filament used.

Water Bottle Cap
To clean my indoor air of fine dust, smog and other environmental toxins, I came across an article about plants for the bedroom. According to NASA tests, certain plants are particularly suitable for air purification. These include, among other things:

Biological air purifier, indoor planter, plant pot (Medium)