your Personal CNC Designer

Category

I was looking for succulent planters and really liked the hexagon planter look but could not find one that was designed for vase mode printing so I made my own.
Jardinières

Vase mode hexagon planter with base
A simple planter. Plant not included.
Jardinières

Geometric Planter
This is a remix of Keagan_Exsteen's excellent poly planter. The original tapers inwards at the top which made it unsuitble for a number of plants. This one tapers outward which makes it perfect for many types of succulents and is much easier to handle when planting. The original also had a number of geometry issues which caused it to print differently depending on the slicer. I repaired it and included a normal (96x96x48mm) and a mini (65x65x35mm) size.
Jardinières

Low Poly Planter - Wide Top
Castle tower for your succulent? Yes, another succulent planter for your desk or home. This one has the over water drain in the lower level. If you see water there, you have watered too much. The bottom vents allow the soil to breathe.
Jardinières

Tower Planter Pot
Tricerapots is a remix of a low poly model of a triceratops. I put a hole in it sized for a small air plant and cut the head off so that it could print separately with less support material.
Jardinières

Tricerapots

Here's the first round of my planter series where I experimented with some new shapes! These were all printed at .35 mm on my Prusa i3 Mk2 MMU
Jardinières

Custom Planter Series
My custom version of Oddish Planter. Get reference from the original design. Re-model and adjust shape and size Add bottom plate.
Jardinières

Oddish Planter

Small shelf for 90 degree corners. Made to be held up with 3m double sided pads or similar product. Great for holding single potted plant or other small items in the corners of your home. There is a large shelf and a small one, both have the same surface area, but one is thinner. The large version is the one featured in the images, I will upload images of the small one soon.
Décoration murale

Corner Shelf
Vase printed in 3 parts. Simply glue Top and Bottom together.
Jardinières

Hanging Vase
This design features half of a shape that is cylindrical at its base and polygonal at the top. At a designated height in between (taper height percent), the shape will have transformed from a smaller cylinder (bottom diameter percent) to a larger polygon (taper width percent), and from that height, it will transform from a smaller polygon to a larger polygon (planter width).
Jardinières

Customizable Hanging Wall Planter
Geo-Diamond Air Plant Holder Print respective halves of holder. Glue together with some super glue!
Jardinières

Geo-Diamond Air Plant Holder
Small geometric planter for holding succulents and small desk plants. This planter can be placed in multiples to create a small succulent garden, or can also be used as desktop organizer to hold paper clips or SD cards. Designed for 3D printing with Autodesk Inventor Fusion. This planter is still a work in progress, I'll be adding a version without a drain hole shortly. Please note, this item is available to be printed through a Creative Commons, Attribution, Non-commercial license. If you would like to use or license this model for commercial use, please contact me through thingiverse or wearableplanter.com. There's been a lot of people using this model without attribution for commercial purposes, PLEASE DON'T BE THAT PERSON. If you would like to use this model for commercial uses, please contact me about how to obtain a commercial license.
Jardinières

Hexagon Succulent Planter
This is a dodecahedron shaped wall planter, its ready to install right after print. Scale it as needed. Print Settings Rafts: Yes Supports: No Infill: 15% Notes: 2 -3 shells
Jardinières

Dodecahedron wall planter
Mid Century inspired small planter. Legs printed with Wood PLA. Pot is not leaking with a 0.2 definition.
Jardinières

Mid Century Small Planter
Model Height 140cm. Resize as you see fit in your slicer. No supports required.
Jardinières

LoPoly Planter/Pen Holder
Tie and bow tie planter. Bring your succulent plant to a serious business level. ;)
Jardinières

tie and bow tie planter
Made for a 10" potted plant. The stand is keyed to ensure that the halves fit together in the correct orientation. The pot will only fit flush in one orientation, so just rotate it until it slots in without any pressure.
Jardinières

10" Pot with Stand
Leggy is a very special succulent planter that could walk away at any time, but as long as he has light and enough water, he will stay with you forever :) This cute little planter with a simple design will be the best gift for your friends.
Jardinières

Succulent Planter / 3D printed planter / Legged Planter
[NO LONGER MAINTAINED] There are leaking issues with the bottom overhanging curve. I have lost source files to original design and can not share, sorry. [NO LONGER MAINTAINED]
Jardinières

Tileable Self Watering Planter
A small succulent planter with built-in drainage. Designed to print without support and hold a much soil as possible without taking too much space on a desk.
Jardinières

Succulent Planter 2
This is a hanging planter that attaches to metal overhead cabinets in offices. I used a 38mm ceramic magnet that comes in an Edmunds Scientific Magnet grab bag. You can get the same grab bag here (no guarantee that the exact same magnet will be in the grab bag)
Jardinières

Magnetic Hanging Office Planter
Prints in five parts with snap together legs! Use a little bit of super glue to hold everything together! You can also draw the eyes on using a regular Sharpie.
Jardinières

Oddish Planter with Snap Together Legs!
Wooden Wall Panel Pattern Free Vector
Nourriture boisson

Wooden Wall Panel Pattern Free Vector
Happy Planter is a very special succulent planter that will bring a smile to everyone :) This cute little planter with a simple design will be the best gift for your friends.
Jardinières

Happy Planter / 3D printed planter