your personal cnc Designer

Tools

Print the wrench, remove the supports and start work!

Imprime la llave, quita los soportes y empieza a utilizarla!

Print Settings
Rafts:
No

Supports:
No

Resolution:
0,1 / 0,05

Infill:
20% or more

Llave inglesa

This is a dremel-like workstation.
I took some parts from other proyects here, the dremel holder nut and the pinion/gear system for instance.
Then I designed an aditional rotable support which allows to hold the tool at 45 and 90 degrees.

It's built from some spare nuts and bolts, and a piece of 19mm diameter pipe, so you'll probably want to adjust some nut holders and holes in the design.
The rotable support need some improvements in order to allow an easier way to release the holder nut and rotate the body, I've made a cross pattern in it, to feel the click when you reach 45 and 90 degrees, but it's not perfect.

I'm using it with a chinese dremel clone, so I asume it's dremel compatible.
Feel free to adapt to your needs, propose some changes and share the results.

Rotary Tool Workstation

A simple dovetail marking guide as described by Paul Sellers in his video series. Of course, his are made out of a nice piece of hardwood, but I couldn't resists doing a 3D model in Fusion 360. Step files are included in case you'd like to change the slope.

Thanks for looking!
Bob M

Dovetail Guide (1:7)

... ohne Nacharbeit - außer dem Zusammenkleben natürlich.

Ich habe dieses Sortiment heute schon einmal geduckt. In einem Teil... Das Ergebnis war ein zwar nutzbarer Sortimentskasten, jedoch durch die vielen Verfahrwege total mit Fäden voll, die man wieder von Hand entfernen muss... Ihr kennt das. Macht einfach keinen Spaß.

Stapelbares Kleinteilsortiment - ohne Nacharbeit

Laser Cut Wooden Phone Cover with a live flexible hinge for easier usage and protecting phone

Wooden Phone Cover

troubles with printing the threaded rods?
This is a low overhang design which was also used for the G-Clamp.

Low overhang threaded rod

A paintbrush holder for stopping paintbrushes from marking or rolling off the table. It is customisable so you can play with the dimensions and also the number of paintbrushes that it can hold.
You can see more details at http://jweoblog.com/?p=277

Instructions
Designed in OpenSCAD, printed on a RepRap Huxley in white PLA

Customizable Paintbrush Holder

This is a height gauge I wanted for my shop on the table saw and router table.

I made it so it can be calibrated before use. I took the time to lightly sand the top of the calibration flange to sharpen the points just a bit to increase the accuracy of the gauge.

The rule holder can either ride the tool or bit up to the desired height or you can set a height and lock it in using the rear knob.

Height Gauge

Simple hot glue gun stand.
It is for smaller guns, Fusion360 file included if you will want to edit it to fit your tools.

Hot Glue Gun stand

Vial stand for fountain pen inks. Design 1 holds 5 vials, design 2 holds 10 vials.

I'm still refining the design to make a more aesthetically pleasing version, but for now this is a functional version.

Print sideways. Basically, avoid the overhangs. if you print standing up, the top layer won't turn out properly. Printing with supports will be a huge pain too.

Vial stand for Fountain Pen Inks

Laser Cut Wooden Tree Jewelry Stand Ring Holder DXF File

Laser Cut Wooden Tree Jewelry Stand Ring Holder DXF File

Just ah simple shelf.

Pinboard shelf

This is a Holder for Kress FME1050-1 Collets (6 parts) and Nuts with or without a collet (8 parts).

Kress Collet and Nut Holder

Variety of Racks for Wiha Screw Drivers

upload was not exported correctly, file has been replaced with good export.

Have a Wiha set this doesn't quite fit, let me know and maybe I can get a custom bracket designed for you!

Wiha Precision Screw Driver Racks

Laser Cut Decorative Wooden Book Box DXF File

Laser Cut Decorative Wooden Book Box DXF File

For construction of this model you will need:
5x 608 bearings
4x M5x15+ screw + 4xM5 nut
3x M3x 10,15, 20 + 3xM3 nut
one M3 and one M6 spacer

Pantograph for scaling up using 608 bearings

18 holes to use with brushes and 16 to the paints.

Paint & Brush Holder

This is a little hacksaw i made.
2 M3 screws are used for fixing the blade.
The blade is a 300 x 12.5 x 0.6 mm.

For printing:
I stopped the printing after 3.2mm and lay the blade into the slot. Then i continued the print with the blade. That garante that the blade fits into the slot. However, if your printer is good in printing bridges, this is not needed. Do this on your own risk ;)

Mini Hacksaw

This a clamp kit I made for my new MPCNC build.

It uses M6 Coach bolts as a hardware base with several handy attachments

To insert the M6 Nut into the knobs stop the print on layer 50, press the nut in all the way and continue the print

In Progress:
Heavy Duty Arm
Support pads
Horizontal clamp attachment

FLZ CNC Clamp Kit

Cylinder Center Finder

Wooden Trivet Shippo DXF File

Wooden Trivet Shippo DXF File

Lens Holder

Wall Mounted Flat Bit Holder.
Holding the most common drill bits from 1.5mm to 13mm with 3.2mm and 4.8mm extras.
Also a few spare holes for doubles or other bits.

Flatbit Holder

CNC Clamp

1
2
3
4
5