your personal cnc Designer

Tool Holders

The case that came with my Dremel was a bit small for the extra accessories I had purchased over time. I found an inexpensive 13" Project Source toolbox at Lowes that could hold all my Dremel stuff plus more.

Dremel Toolbox Organizers
Variety of Racks for Wiha Screw Drivers upload was not exported correctly, file has been replaced with good export. Have a Wiha set this doesn't quite fit, let me know and maybe I can get a custom bracket designed for you!

Wiha Precision Screw Driver Racks
The tool holder and the table will be combined by a dovetail connection. The table can be easily removed to change the saw. It is also possible to create other accessories which can be plugged into the tool holder. The tool holder itself can be mounted by six screws on a panel or a worktable.

Sawing table for rotary tool like TackLife or Dremel
This is a TS100 holder with sponge container (58x58mm). Print Settings Printer: mini kossel Rafts: Doesn't Matter Supports: No Resolution: 0.2 mm Infill: 25% Notes: No special parameters Post-Printing Remove the mouse ears This are for prevent curling edges, it can be removed without knife.

Ts100 Holder
This is a compact container for sewing thread bobbins in a 3x3 configuration that holds a total of 9. It was designed to accompany my vintage Singer 201-2 sewing machine so one version of the top has the old vintage Singer logo and there's also a version without any logo. For the bottom, you can select a flush version for a seamless edge or a notched version that allows you to easily separate the top from the bottom. This holds vintage style metal spools as well as the modern clear plastic ones. Print the top with the flat side down (especially on a glass bed for a smooth and shiny top). The lid is toleranced with an offset so that it should open and close without being too tight.

3x3 Sewing Bobbin Holder
Wrench Rack for short metric wrenches stp file included too

Short Metric Wrench Rack 6 19mm
Wooden Trivet Shippo DXF File

Wooden Trivet Shippo DXF File
These are designed for husky brand sockets, so they may not fit other brands correctly. I attached the solidworks files for the plates so you can adjust the sizes. The brackets are not peg-compatible and use screws, but it would be a cool feature to add in the future. The holes for each socket are tapered so pushing the sockets in gives a tight enough fit to hold them. The brackets are designed so that the plates can be removed when you are using them. For the metric sockets, the numbers are in mm. for the imperial, they are in 64ths of an inch (trying to fit fractions in the space was not feasible with my printer).

Imperial/Metric Ratchet Socket Storage
It's designed for this iron

Stand for banggood soldering iron
Wooden Decor Key Holder With Keychains For Couple Laser Cut Template DXF File

Wooden Decor Key Holder With Keychains For Couple Laser Cut Template DXF File
I made some pieces to adapt my driller "Worx" bought in Leroy Merlin to the Rotary tool To join the top support pieces, use a M8 screw. You will need also 2 x M3 screws.

Support for Worx brand driller to adapt to Rotary tool
Wooden Clothes and Hat Floor Rack Hooks DXF File

Wooden Clothes and Hat Floor Rack Hooks DXF File
This is a tool to cut small diameter rods or tubes using a Dremel. I use it with a Dremel 395. It has the Dremel thread (M18x2,25/ANSI 3/4-12) in the guide part, so you can just easily screw the Dremel in. You will need a small tube or rod with a 10mm diameter to connect the two parts. The guide part might need some sanding to fit in the base, I wanted it to fit nicely with little play.

Rod and Tube Cutter for Dremel
Used for all my 3D pinting tools.

Tool Holder
Make a small test print with just one row and one column to make sure your atomizers fit. After that you can print the stand in your desired size.

Customizable Atomizer Stand
Support pour pinces présenté dans la vidéo :

pliers stand / support de pinces by Heliox
Made this is to stop hunting around for tools in drawers and to obviate the chaos on the desk. Ad as many sections as you need. Added LED lights and a touch toggle switch just because its fun. Connections between sections are made with Jst-PH 2 connectors.

Customizable Tool Organizer
I wanted linkable trays to hold all my various sockets neatly and easily identifiable. The attached OpenSCAD file allows the size of the tray, cutouts for tools and text labels all to be customised. Simply measure tools, and enter the exact outside diameter in mm, in rows and columns as you would like them arranged. The tool automatically adds (an adjustable clearance) and centres the rows and columns. There is a switch for each side to add lip so that trays can be clipped together. Every adjustable parameter is at the top of the file so can be tweaked for your exact needs. To option allow the text to raised or engraved

Customisable Socket Tool Tray
Customizable shelf spacer, 3D object to connect (small) shelfs.

Customizable shelf spacer
The Hair Dryer Holster. Took about an hour using 3DS Max. Printed it on the MP Mini. Original print was too big so I cut it into two pieces. Looks nice and works really well.

The Hair Tool Holder
'Corner Drawers' are just that... small sets of drawers made to go in a corner. This provides a simple solution to put corner spaces to good use. The design includes upper and lower runners acting on the drawers so, regardless of the triangular shape, the drawers slide straight in / out without skewing sideways.

Corner Drawers
I was just reorganizing the workshop and decided I wanted to rack my combination wrenches rather than hanging them by the sockets (or letting them rattle around the workbench).

Customizable Wrench Rack
Laser Cut Bench Top Tool Organizer Workshop Tool Holder 4mm Free Vector

Laser Cut Bench Top Tool Organizer Workshop Tool Holder 4mm Free Vector
Wooden Jewelry Box DXF File

Wooden Jewelry Box DXF File