your Personal CNC Designer

Category

This is a remix of the base made to fit an 140% scaled version of Wave lamp Yeah! I've added a curled spiral to hold a LED strip.
Vases

Base and Strip Holder for Wave lamp Yeah!
Modular folding arm to outer lighthouse - braccio regolabile composto da tre pezzi con perni per faretto led esterno added two pin: -simple pin -locking pin P.S. i used as pins two aluminium tubular, but i added two types of pins for those who want to use them, but i haven't tried them! (diameter of the hole: 15 mm) Print Settings Rafts: No Supports: Yes Infill: 40-50+
Wall Lights

modular folding arm to outer lighthouse - Braccio componibile a muro pieghevole per faretto led
This is a desklight. It is composed of 4 parts : The foot "pied low poly.stl" A small lampshade "lampe shade V3 - low poly - petit.stl" A big lampshade "lampe shade V3 - low poly - grand.stl" An adaptater to mount E14 or E27 light bulb The 2 lampshades can rotate on the foot, so you are able to direct the light. I made the part supporting the light bulb socket removable, so anyone can design an adaptator for other light bulb socket. I made the adaptator for e14 and e27 socket size.
Lamp Shades

Nice desk Lamp
Wooden Tree Candle Lantern for home decor
Stand lights

Wooden Tree Candle Lantern

I put in a slow fade color changing 5mm LED and wired it up to an old AC to DC power adapter.
Lanterns

Globe Lamp - Earth
Wireframe Pendant Light Lamp Shade. Built around the Hemma Ikea Light. Stands about 6 inches tall. Prints in one piece with no supports.
Chandeliers

Wireframe Pendant Light
Lamp with Ancient Greek meander patterns. Somewhat easy print since it's printed flat, and scalable to fit smaller beds.
Vases

Greek Meander Lamp
The very first easy-to-print, modular and customizable lamp on Thingiverse! Shaped on the twenty-faced Platonic solid, the icosahedron, this lamp is made of 20 interconnected ad fast to print identical tiles, one for each face.
Lamp Shades

IKOSAGLOD Lamp
ceiling lamp
Chandeliers

ceiling lamp
Lantern created with VECTARY
Lanterns

Lantern

wooden chandelier with pendent lamp and a place to put on plants.
Chandeliers

Wooden Chandelier with pendent lamp

Esta es una creacion de una base especifica para la lampara impresa en PLA con 0,30 mm de capa y un 15 % de infill... se iran subiendo nuevas fotos segun actualizaciones
Stand lights

Base para lampara de Voronoi lamp
A lampshade / tealight cover. It's made of separate pentagons, you need to print 11 of them (If you want to keep just the bottom open. When using with tealights, it may be a good idea to keep the top open also.) and glue them together. I also added a filled out single layer version that's more suitable for usable lighting (good with white filament). There are parts for the bottom and for the base, but they are based on my specific bulb holder, so they probably won't be compatible with anything else :) If you like the design and think it's worth a dollar or two, a tip would be greatly appreciated. It would help me design more stuff and post it here.
Lamp Shades

Dodecahedron lampshade
3D printed articulated LED Lamp for desk
Lamp Shades

3D printed desk lamp
This is my selfmade Lightning Lamp. Hope you like it. The Blitzmodule are printed with suppords and an 8mm Brim.
Stand lights

Lightning Lamp
I recommend to print the upper part without supports 100%infill. For the lower part 15% concentric and 100%infill
Lanterns

World Table Lamp
You need: 17cm COB Car LED Lights White 12V Switch At least one meter wire 3mm drill to drill the holes to hide wires. 10x M3x20mm screws and nuts two part resin clue
Stand lights

work lamp

This stand for Globes. ( moon_lamp etc... )
Stand lights

Globe stand for Moon lamp
Laser Cut Cube Heart Night Light DXF File design file ready to exclude on any laser cutting machine free to download
Lanterns

Laser Cut Cube Heart Night Light DXF File
This is the lamp Yeah!! series. Last week I published the first version of a lamp with a new concept. These lampshade are totally INTERCHANGEABLE with the base led, so you can print and use the lampshade that you prefer or you can print all the lampshades and change them depending on the occasion.
Lamp Shades

Buub!! - Lamp interchangeable Yeah!! Series
The design is made for glass heated beds the outside layer of the box is the one on the bottom so it will come out nice and even. For Led light i used one of the long strips just cut some parts out and a wireless remote. I didn't want RGB colors but that will be cool. For diffusion material you can use anything you like. I got this 8x11 papers from the art store that they use as a liner for invitations. The box is glued using super glue. Print Settings Printer: XYZ Rafts: No Supports: No Resolution: 0.2 Infill: 20%
Stand lights

Japanese style light box
Wooden Wall Panel Pattern Free Vector
Food & Drink

Wooden Wall Panel Pattern Free Vector
Low poly Lamp shade. Printed in vase mode. It will fit a E27 threaded lamp socket.
Lamp Shades

Low poly Lamp shade
Since the LED Bridge didn't fit on my desk i had to adapt it to my working space. So I've designed a foot that could easily support the bridge and be fixed on the side of two cabinets. The foots is designed to be similar to the Bridge structure. I've also changed the channels so that the printing time could be reduced.
Stand lights

LED Bridge Alternative Foot and Channels