your personal cnc Designer

Electronics & Accessories

Tablet Holder 6. Four inclinations, easy to print and easy to handle and move with one hand. The central disk is a raft for the supports need for the high part. I just added a 6.2 version with more inclined way.

Tablet Holder 6
An ideal accessory for your Halloween costume. This keychain will help you to hold your smartphone or as a card stand.

Bat Smartphone Stand
Big cloud storage solution for a passive USB drive array. Raid 000. Can be installed on desktop or wall (has a cutout on rear to hang on a screw). I built this from scratch borrowing the idea from crille's original. The geometry here is good so it will print without problems (the top of the original had some issues as it was not flat). Final part = 230mm x 111mm x 21mm so you will need a print volume to suit.

Cloud Storage XL - USB Stick Organiser
I hate it when I need something as am on the computer working, and can't find it nearby and have to get up to find it. This is why I made this shelf, it's similar to my headphone shelf, in that you simply stick it with tape on your computer case, but a lot larger in size. I added the line 'this too shall pass' as continuous motivation for me when am working, since i spend on average over twelve hours a day on my computer. Would love to see your takes/prints on this :)

Computer Case Shelf
I wanted to have the OTG adapter (USB C to USB A) with me at all times without losing it so I made this secure keychain holder that grips around the side of the adapter and has a tongue that fits into the USB-A port. Print at 0.1mm with 100% infill and supports.

Keychain Holder for Galaxy S8 OTG Adapter (USB C to USB-A)
I modified for my laptop. (NT900X5L) I added open type for my another laptop (18/6/13)

Laptop stand
30' Phone stand, foldable and fits in your wallet.

Bank card sized Phone stand
I recently purchased a Xiaomi Mijia Digital Thermometer / Hygrometer. It's a great little device. The only drawback so far is that there is no stand included. It only comes with a magnetic plate for wall mounting. Therefore I designed my own. It doesn't need any fancy magnets or stuff - its just gravity doing it's thing.

Xiaomi Mijia Thermometer / Hygrometer stand
Here is my version of the Headphone Stand, it is a remix of the Headphone Stand created by MakerBot.

Headphone Stand
A complete kit with PC cable combs in all diferent sizes used on most power supplies ! Tight nice fit on regular sleeved power supply cables. (slot diameter on the combs is 3.8mm) All sizes available for download individually or use the "Cable Combs All" file for one of each size

PC Cable Combs - complete comb kit
I have one of those aluminum mStands for my laptop at work and I wanted a phone stand to match.... So this was born. Enjoy!

mStand inspired Phone stand
Note: This is for the original Google Home Mini, not the new Google Nest Mini. The Google Nest Mini has a built-in mounting slot for a screw. It also has a different power plug which doesn't fit this design.

Google Home Mini Wall Mount
This is a modification of my Anker Decora Mount , which fits on a Wally Wall Plate from using the "none" option for the place you want the power supply mounted. This gives you the option of co-ordinating (or contrasting) the wall plate and power supply holder colors. The previous version had a Left and Right style, this one can go on either side, just populate the 3mm inserts in the appropriate place. I've included the Wally mount I used, but you can obviously use any Wally mount, though you'll want the power supply on one end of the plate and you probably have to use the largest plate size. I used 3x8mm screws and washers, and they still pulled the inserts out slightly, you could drill out the holes to prevent this, but it works just fine the way it is. I'm planning on shortening the power cord using one of those zip cord plugs, but haven't gotten to the hardware store yet.

Anker Wally Mount
Stand for holding a phone about 72mm wide (the phone in the picture is a Moto X4*. The stand has two positions depending on which side is placed down. The clip stays attached to the phone so it should work better on uneven surfaces (sofa, rock, bed, etc).

Clip Phone Stand
Cable organizer

Cable organizer
Retro TV Phone Stand dxf File

Retro TV Phone Stand dxf File
Triangular stand for 14" laptops, that can be printed in one piece with Original Prusa i3 MK2.

Triangular Laptop Stand
Plugs into Micro USB port to keep out dust. Please be careful installing and removing to prevent breakage!

Micro USB Dust Cover
Mobile Phone Stand for Desk

Mobile Phone Stand for Desk
It is a phone holder - adjustable with screw.

Adjustable car phone holder
Get organized! The Manhattan Pegboard Collection for 3D Printers is a group of modern, customizable parts that allow you to generate bins, mounts, holders and even shelves for nearly every object that you may want to have neatly hung on a pegboard. As a NYC native, I never had ‘extra space’ in my home. So when I purchased an Ultimaker 2 3D Printer ten months ago, I knew that I wanted to use it to improve my life. By mounting modular pegboards strategically throughout my home, I have been able to create custom mounts for all of the little things in life and place them exactly where they need to be. I now manage to keep ‘everything in its place’ because everything has a place to go!

USB Cable Holder (6 Cables) for Pegboard
Ethernet Cable Runners provide a simple solution to keep your Ethernet cables neat, under control and easy to access, insert and remove. The range accommodates from 2 to 16 cables. Each slot only ever accepts up to 2 cables. This ensures you can easily access and remove inner cables...the maximum that can be outside it is one. There are also three types. The standard type is for use unsecured along the floor or across a desk. The other two types have two types to secure the Ethernet Cable Runners with a cable / zip tie. Type "T" has the slot aligned inline with the cables direction. Type "T90" has the slot rotated 90 degrees from the cable direction. The slot is suitable for use with medium size cable ties. This allow bunches on cables to be run along under shelves / racking. Refer to the images for more information.

Ethernet Cable Runners
Simple and resistant stand for your tablet or smartphone. You can put in different positions even they hang on the wall.

Smartphone and tablet Stand
This is a 3D printed Macbook air stand. For mounting you Macbook inset in your desk at a 45 degree angle. The stand is about 4 inches deep and the Macbook needs to be mounted with the skinny end going down. This leaves you access to most of the ports. For the 11 inch Macbook Air, Depending on which end you put down, you may cover up the speaker port or make the low side USB port a little tricky to get plugged in. Larger models will have even fewer restrictions. You will need to cut a rectangular hole in your desk to mount this. A cut guide can be seen in the last picture and I including an .stl file for the guide if you want to print it out. I would recommend adhering the finished stand into the table top.

Macbook Air Stand - In Desk