your personal cnc Designer

تصميم جمجم تصاحب الظلال قطع ليزر

تصميم جمجم تصاحب الظلال قطع ليزر التحميل مجانا
mobycnc
mobycnc
لم يتم التجربه
الصيغ

#Skull #vector
ابلغ عن التصميم

الوصف

تصميم جمجم تصاحب الظلال قطع ليزر التحميل مجانا

التفاصيل

تصاميم ذات صله

An anchor as decoration.

Anchor wall decoration
Celtic Ornament Pattern Free Vector

Celtic Ornament Pattern Free Vector
There are many one handed book holders out there but this one is designed with fillets for comfort and includes a hook feature so you can use it as a bookmark too. It also has the word "read" on the outside for fun. Included solidworks part file if you want to make it say something else. Easy print, no specific requirements on settings.

One Handed Book Page Holder with Bookmark Hook
Dolls House dxf File

Dolls House dxf File
Laser Cut Toddler Laptop For Learning And Play Free Vector

Laser Cut Toddler Laptop For Learning And Play Free Vector

كن أول من يكتب تعليق على التصميم

تريد المزيد من التصاميم !!

Piper Cherokee Aircraft Model DXF File

Piper Cherokee Aircraft Model DXF File
Skull 018 dxf File

Skull 018 dxf File
UPDATE: I should just delete this thing! It's TERRIBLE! See my much better tape dispenser at https://www.thingiverse.com/thing:4110302 UPDATE: I'm surprised people are still liking and collecting this old, terrible, obsolete version! WHY? WHY? WHY? I have designed a new (2020), improved 3-inch wide blue painter's tape dispenser. It is at https://www.thingiverse.com/thing:4110302 and it is much better -- better assembly method, more rigid, non-gravity dependent hub, no glue, better blade, better overall design. My original dispenser (the one on this page) has turned out to be fairly popular, but it is not very rigid, and has other issues that make it less friendly, however, mine has been in use since 2013, so it has stood the test of time quite well. But it's not nearly as spiffy as my new (2020) design, so check it out at the above link before you consider printing this old crumby one. Original posts: Tape dispenser for 3-inch wide blue painter's tape. Improved Dec 24, 2013. Fully 3D printable without supports. New (2014) improved version has base parts with holes for mounting screws and they clip over the bottom of the side parts (one near the front, one near the back) for sturdy mounting to a bench. The first photo shows the original version that had base parts with no holes (I drilled them to put screws through to the work bench) and relied on glue to bond them to the sides, but the force required to pull tape off the spool was too much and the glue joints kept failing. This revision fixes that by having the bases clamp over the horizontal members at the bottom of the sides. The blade still uses super glue to hold it in place -- more about the blade in the instructions. A printable serrated blade can be found at https://www.thingiverse.com/thing:2329277 Second photo added 13MAR2014 showing the new bases that clamp over the bottom of the sides. Instructions I printed in PLA with 0.25mm layers, 20% fill, 2 skins. Print these files to make a complete set of parts: 2 each: 3inTD-Side.stl (Makes 1 Side) 1 each: 3inTD-Hub.stl (Makes 1 Hub) 1 each: BasesBlade&Pins.stl (Makes 2 Bases, 1 Blade & 2 Pins) Or if you want to print the parts separately, these files are also supplied: 3inTD-BaseX2.stl (Makes 2 Bases) 3inTD-Base.stl (Makes 1 Base) 3inTD-Blade.stl (Makes 1 Blade) 3inTD-PinX2.stl (Makes 2 Pins) The Blade has a beveled edge for cutting the tape. I sharpened the edge with a file and it works pretty well for cutting blue tape (see more about cutting the tape below). The blade is inserted and glued into the holes on the sides that have the same cross-section as the blade. A metal cutting edge could be added fairly easily if desired, but the PLA plastic sharpened with a file seems to be adequate as long as you get a good sharp edge on it. Ultimately, I made an aluminum blade from 1mm thick aluminum sheet, sharpened the edge, and stuck it on top of the plastic cutter part, attached with double-sided woven fiberglass carpet tape (available at hardware stores). It seems to work better than the PLA blade, as one might expect. I used super glue to attach the plastic blade to the sides where it inserts into the holes. I also used super glue to attach the pins to the hub, leaving the heads of the pins out 5mm from the hub to allow clearance for the 5mm thick sides. I found that super glue doesn't hold PLA too well, but inserting a thin layer of tissue paper material (I used a paper towel) between the mating PLA part faces and saturating with super glue makes a fairly strong bond, but it can still come apart). Use 4 each #4 x 3/4" wood screws through the countersunk holes in the two base parts to mount to the workbench or #4 or 3mm flat head machine screws and nuts for through-hole mounting. You have to learn a new way of tearing the tape. If you just try to tear it off by pulling the tape down on the cutting edge the tape won't tear cleanly, or at all. This is because blue tape is essentially stretchy crepe paper with sticky on it, and pulling it straight down just stretches it (unless you have a very sharp, serrated metal edge). To tear the tape cleanly you must grab the tape near one edge and give it sort of a 90 degree twist down, so the tape edge where the tear starts gets all the force, rather than applying force to the entire width of the tape along the blade edge. Only then can you easily start the cut at that edge, and once it starts the rest of the tear is easy. It's harder to describe than to do it, but once you get the hang of it you can do it every time in one rapid motion. I went through a couple feet of tape before I figured out the method that works every time! If you make one of these dispensers you WILL figure it out sooner or later -- like I did.

Terrible, Horrible, Awful, Stinky, Crappy, Worthless Tape Dispenser 3" Wide x 3" I.D. (See link to new version below)
Lowrider dxf File

Lowrider dxf File
Rubber Band Gun Laser Cut DXF File

Rubber Band Gun Laser Cut DXF File
Arrow Ring Design dxf File

Arrow Ring Design dxf File
Animals Dogs Race dxf file

Animals Dogs Race dxf file
Laser Cut Pegasus 3mm Free Vector

Laser Cut Pegasus 3mm Free Vector
Paris France Vinyl Record Wall Clock Laser Cut Template Free Vector

Paris France Vinyl Record Wall Clock Laser Cut Template Free Vector
Laser Cut Lamp 14 Free Vector

Laser Cut Lamp 14 Free Vector
Hand Gestures Vector Art Free Vector

Hand Gestures Vector Art Free Vector
Alpaka 2 dxf File

Alpaka 2 dxf File
Slipstream Table CNC Router Laser Template Free Vector

Slipstream Table CNC Router Laser Template Free Vector
Laurels and Wreaths Design 4 dxf file

Laurels and Wreaths Design 4 dxf file
Decorative Wall Hanger Decorative Hooks DXF File

Decorative Wall Hanger Decorative Hooks DXF File
Birds Stencils Free Vector

Birds Stencils Free Vector
Bear Standing dxf File

Bear Standing dxf File
Balladeers dxf File

Balladeers dxf File
Halloween vector set Free Vector

Halloween vector set Free Vector
Girls Silhouette Vector Art Free Vector

Girls Silhouette Vector Art Free Vector
Flower Sandblast Pattern Free Vector

Flower Sandblast Pattern Free Vector
075j9moz dxf File

075j9moz dxf File
US State Maps Alabama Al dxf File

US State Maps Alabama Al dxf File
Basketball dxf File

Basketball dxf File
CNC 3D Relief Design stl File

CNC 3D Relief Design stl File
Fashion Silhouette Vector Free Vector

Fashion Silhouette Vector Free Vector
Laser Cut Shelf Rack for Kitchen Free Vector

Laser Cut Shelf Rack for Kitchen Free Vector
Puzzles for Kids Plywood 6 mm Free Vector

Puzzles for Kids Plywood 6 mm Free Vector
Laser Cut Dried Fruit And Nuts Tray With Tissue Box Free Vector

Laser Cut Dried Fruit And Nuts Tray With Tissue Box Free Vector